There are a number of approaches to mount custom flags and banners the right way. Look for the right technique according to your objectives.
About Between Pole Mounting – If you’re aiming to place banners between two or more poles, you can use webbing or rope with the D-rings positioned at the bottom or high point of the banner. You can also tie the rope around the large eye screws or poles since these can be put on the poles too. At the end of the webbing, you can find D-rings that can be connected with the bungee cords and then put around the big eye screws or the poles. Bungee cord mounting is one of the most useful methods since the banner will last long against harsh weather. Mounting the banners between poles using a rope tied to a corner via the grommet holes will not be ideal. The grommets will easily rip so you have to put the bungee cords to corner grommet holes.
About Lawn Mounting – If you’re planning to install temporary banners over grassy locations, you can also try lawn mounting which is quite the same as between pole mounting. You can find steel T posts from home improvement places like Lowe’s or Home Depot. These can be installed via a post driver. The banner can be placed using tough plastic wire ties.
About Fence Mounting – If you like to put banners on a chain link, this is a very simple method. Just use zip ties or hard plastic wire ties then mount the banners on a chain link fence.